Specifications

index
MP-84
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
index
To insert or modify a path entry at a specific index, use the index command in IP explicit path
configuration mode. To remove the path entry at the specified index, use the no form of this command.
index i
ndex command
no index i
ndex
Syntax Description
Defaults This command is disabled.
Command Modes IP explicit path configuration
Command History
Examples The following example shows how to insert the next address at index 6:
Router(cfg-ip-expl-path)# index 6 next-address 10.3.29.3
Explicit Path identifier 6:
6: next-address 10.3.29.3
index Index number at which the path entry will be inserted or modified. Valid
values are from 0 to 65534.
command An IP explicit path configuration command that creates or modifies a path
e
ntry. (You can use only the next-address command.)
Release Modification
12.0(5)S This command was introduced.
12.1(3)T This command was integrated into Cisco IOS Release 12.1(3)T.
12.0(10)ST This command was integrated into Cisco IOS Release 12.0(10)ST.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.