Specifications

interface auto-template
MP-88
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
interface auto-template
To create the template interface, use the interface auto-template command in global configuration
mode. To delete this interface, use the no form of this command.
interface auto-template in
terface-num
no interface auto-template
Syntax Description
Command Default No default behavior or values are required to create templates.
Command Modes Global configuration (config)#
Command History
Usage Guidelines The space before the i
nterface-num argument is optional.
Use the shut
down command to disable mesh tunnel interface creation when creating a template.
Examples The following example shows how to create template interface 1:
Router(config)# interface auto-template 1
Related Commands
interface-num Interface number. Valid values are from 1 to 25.
Release Modification
12.0(27)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Command Description
clear mpls traffic-eng auto-tunnel mesh Removes all the mesh tunnel interfaces and re-creates
th
em.
mpls traffic-eng auto-tunnel mesh Enables autotunnel mesh groups globally.
show mpls traffic-eng auto-tunnel mesh Displays the cloned mesh tunnel interfaces of each
au
totemplate interface and the current range of mesh
tunnel interface numbers.