Specifications

interface xtagatm
MP-89
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
interface xtagatm
Note Effective with Cisco IOS Release 12.4(20)T, the interface xtagatm command is not available in
Cisco IOS software.
To create an extended Multiprotocol Label Switching (MPLS) ATM (XTagATM) interface, use the
i
nterface xtagatm command in global configuration mode.
interface xtagatm i
nterface-number
Syntax Description
Defaults XTagATM interfaces are not created.
Command Modes Global configuration (config)
Command History
Usage Guidelines XTagATM interfaces are virtual interfaces that are created on reference-like tunnel interfaces. An
XT
agATM interface is created the first time the interface xtagatm command is issued for a particular
interface number. These interfaces are similar to ATM interfaces, except that the former only supports
LC-ATM encapsulation.
Examples The following example shows how to create an XTagATM interface with interface number 62:
Router(config)# interface xtagatm62
Related Commands
interface-number The interface number.
Release Modification
12.0(5)T This command was introduced.
12.2(4)T This command was updated to reflect the MPLS IETF terminology.
12.4(20)T This command was removed.
Command Description
extended-port Associates the currently selected extended XTagATM interface with a
r
emotely controlled switch.