Specifications

ip rsvp signalling hello (configuration)
MP-106
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
ip rsvp signalling hello (configuration)
To enable Hello globally on the router, use the ip rsvp signalling hello command in global configuration
mode. To disable Hello globally on the router, use the no form of this command.
ip rsvp signalling hello
no ip rsvp signalling hello
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Global configuration
Command History
Usage Guidelines To enable Hello globally on the router, you must enter this command. You also must enable Hello on the
in
terface.
Examples In the following example, Hello is enabled globally on the router:
Router(config)# ip rsvp signalling hello
Related Commands
Release Modification
12.0(22)S This command was introduced.
12.2(18)SXD1 This command was integrated into Cisco IOS Release 12.2(18)SXD1.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(31)SB2 This command was integrated into Cisco IOS Release 12.2(31)SB2.
Command Description
ip rsvp signalling hello (interface) Enables Hello on an interface where you need Fast Reroute
pro
tection.
ip rsvp signalling hello statistics Enables Hello statistics on the router.