Specifications

list
MP-128
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
list
To show all or part of the explicit path or paths, use the list command in IP explicit path configuration
mode.
list [st
arting-index-number]
Syntax Description
Defaults Explicit paths are not shown.
Command Modes IP explicit path configuration
Command History
Examples The following example shows how to list the explicit path:
Router(cfg-ip-expl-path)# list
Explicit Path name path1:
1:next-address 10.0.0.1
2:next-address 10.0.0.2
The following example shows how to list the explicit path starting at index number 2:
Router(cfg-ip-expl-path)# list 2
Explicit Path name path1:
2:next-address 10.0.0.2
Router(cfg-ip-expl-path)#
starting-index-number (Optional) Index number at which the explicit path(s) will start to be
displayed. Valid values are from 1 to 65535.
Release Modification
12.0(5)S This command was introduced.
12.1(3)T This command was integrated into Cisco IOS Release 12.1(3)T.
12.0(10)ST This command was integrated into Cisco IOS Release 12.0(10)ST.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.