Specifications

list (LSP Attributes)
MP-130
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
list (LSP Attributes)
To display the contents of a label switched path (LSP) attribute list, use the list command in LSP
Attributes configuration mode.
list
Syntax Description This command has no arguments or keywords.
Command Default Contents of an LSP attribute list is not displayed.
Command Modes LSP Attributes configuration (config-lsp-attr)
Command History
Usage Guidelines This command displays the contents of the LSP attribute list. You can display each of the following
co
nfigurable LSP attributes using the list command: affinity, auto-bw, bandwidth, lockdown, priority,
protection, and record-route.
Examples The following example shows how to display the contents of an LSP attribute list identified with the
str
ing priority:
!
Router(config)# mpls traffic-eng lsp attributes priority
Router(config-lps-attr)# priority 0 0
Router(config-lps-attr)# list
LIST priority
priority 0 0
Router(config-lsp-attr)#
Related Commands
Release Modification
12.0(26)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Command Description
mpls traffic-eng lsp attributes Creates or modifies an LSP attribute list.
show mpls traffic-eng lsp attributes Displays global LSP attribute lists.