Specifications

About Cisco IOS Software Documentation
Documentation Organization
xxiii
• Cisco IOS High Availability Configuration Guide
• Cisco IOS High Availability Command Reference
A variety of high availability (HA) features and technologies
that are available for different network segments (from
enterprise access to service provider core) to facilitate creation
of end-to-end highly available networks. Cisco IOS HA features
and technologies can be categorized in three key areas:
system-level resiliency, network-level resiliency, and embedded
management for resiliency.
• Cisco IOS Integrated Session Border Controller
Command Reference
A VoIP-enabled device that is deployed at the edge of networks.
An SBC is a toolkit of functions, such as signaling interworking,
network hiding, security, and quality of service (QoS).
• Cisco IOS Intelligent Services Gateway
Configuration Guide
• Cisco IOS Intelligent Services Gateway
Command Reference
Subscriber identification, service and policy determination,
session creation, session policy enforcement, session life-cycle
management, accounting for access and service usage, and
session state monitoring.
• Cisco IOS Interface and Hardware Component
Configuration Guide
• Cisco IOS Interface and Hardware Component
Command Reference
LAN interfaces, logical interfaces, serial interfaces, virtual
interfaces, and interface configuration.
• Cisco IOS IP Addressing Services
Configuration Guide
• Cisco IOS IP Addressing Services
Command Reference
Address Resolution Protocol (ARP), Network Address
Translation (NAT), Domain Name System (DNS), Dynamic
Host Configuration Protocol (DHCP), and Next Hop Address
Resolution Protocol (NHRP).
• Cisco IOS IP Application Services
Configuration Guide
• Cisco IOS IP Application Services
Command Reference
Enhanced Object Tracking (EOT), Gateway Load Balancing
Protocol (GLBP), Hot Standby Router Protocol (HSRP), IP
Services, Server Load Balancing (SLB), Stream Control
Transmission Protocol (SCTP), TCP, Web Cache
Communication Protocol (WCCP), User Datagram Protocol
(UDP), and Virtual Router Redundancy Protocol (VRRP).
• Cisco IOS IP Mobility Configuration Guide
• Cisco IOS IP Mobility Command Reference
Mobile ad hoc networks (MANet) and Cisco mobile networks.
• Cisco IOS IP Multicast Configuration Guide
• Cisco IOS IP Multicast Command Reference
Protocol Independent Multicast (PIM) sparse mode (PIM-SM),
bidirectional PIM (bidir-PIM), Source Specific Multicast
(SSM), Multicast Source Discovery Protocol (MSDP), Internet
Group Management Protocol (IGMP), and Multicast VPN
(MVPN).
• Cisco IOS IP Routing: BFD Configuration Guide Bidirectional forwarding detection (BFD).
• Cisco IOS IP Routing: BGP Configuration Guide
• Cisco IOS IP Routing: BGP Command Reference
Border Gateway Protocol (BGP), multiprotocol BGP,
multiprotocol BGP extensions for IP multicast.
• Cisco IOS IP Routing: EIGRP Configuration Guide
• Cisco IOS IP Routing: EIGRP Command Reference
Enhanced Interior Gateway Routing Protocol (EIGRP).
• Cisco IOS IP Routing: ISIS Configuration Guide
• Cisco IOS IP Routing: ISIS Command Reference
Intermediate System-to-Intermediate System (IS-IS).
Table 1 Cisco IOS Configuration Guides and Command References (continued)
Configuration Guide and Command Reference Titles Features/Protocols/Technologies