Specifications

mpls label protocol (global configuration)
MP-190
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Note Use caution when upgrading the image on a router that uses TDP. Ensure that the TDP sessions are
established when the new image is loaded. You can accomplish this by issuing the global configuration
command mpls label protocol tdp. Issue this command and save it to the startup configuration before
loading the new image. Alternatively, you can enter the command and save the running configuration
immediately after loading the new image.
Examples The following command establishes LDP as the label distribution protocol for the platform:
Router(config)# mpls label protocol ldp
Related Commands Command Description
mpls idp maxhops Limits the number of hops permitted in an LSP established by the
D
ownstream on Demand method of label distribution.
show mpls interfaces Displays information about one or more or all interfaces that are configured
f
or label switching.