Specifications

mpls label protocol (interface configuration)
MP-191
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls label protocol (interface configuration)
To specify the label distribution protocol for an interface, use the mpls label protocol command in
interface configuration mode. To remove the label distribution protocol from the interface, use the no
form of this command.
mpls label protocol {ldp | td
p | both}
no
mpls label protocol
Syntax Description
Command Default If no protocol is explicitly configured for an interface, the label distribution protocol that was configured
fo
r the platform is used. To set the platform label distribution protocol, use the global mpls label
protocol command.
Command Modes Interface configuration (config-if)
Command History
ldp Specifies that the label distribution protocol (LDP) is to be used on the
in
terface.
tdp Specifies that the tag distribution protocol (TDP) is to be used on the
in
terface.
both Specifies that both label and tag distribution protocols are to be supported on
th
e interface.
Release Modification
12.0(10)ST This command was introduced.
12.0(14)ST This command was integrated into Cisco IOS Release 12.0(14)ST.
12.1(2)T This command was integrated into Cisco IOS Release 12.1(2)T.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(4)T This command was integrated into Cisco IOS Release 12.2(4)T.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.