Specifications

mpls ldp address-message
MP-196
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls ldp address-message
To specify advertisement of platform addresses to an LC-ATM label distribution protocol (LDP) peer,
use the mpls ldp address-message command in interface configuration mode. To disable this feature,
use the no form of this command.
mpls ldp address-message
no mpls ldp address-message
Syntax Description This command has no arguments or keywords.
Defaults LDP Address and Address Withdraw messages are not sent to LC-ATM LDP peers.
Command Modes Interface configuration
Command History
Usage Guidelines The LDP specification includes Address and Address Withdraw messages used by a label switch router
(
LSR) to advertise its addresses to its peers.
An LSR uses the addresses it learns from peers when operating in Downstream Unsolicited label
ad
vertisement mode to convert between route next hop addresses (found in the LSR routing table) and
peer LDP identifiers.
Release Modification
12.0(10)ST This command was introduced.
12.0(14)ST This command was integrated into Cisco IOS Release 12.0(14)ST.
12.1(2)T This command was integrated into Cisco IOS Release 12.1(2)T.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(4)T This command was integrated into Cisco IOS Release 12.2(4)T.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.