Specifications

mpls ldp atm vc-merge
MP-206
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls ldp atm vc-merge
Note Effective with Cisco IOS Release 12.4(20)T, the mpls ldp atm vc-merge command is not available in
Cisco IOS software.
To control whether the vc-merge (multipoint-to-point) capability is supported for unicast label virtual
c
ircuits (LVCs), use the mpls ldp atm vc-merge command in global configuration mode. To disable this
feature, use the no form of this command.
mpls ldp atm vc-merge
no mpls ldp atm vc-merge
Syntax Description This command has no arguments or keywords.
Defaults The ATM-VC merge capability is enabled by default if the hardware supports this feature; otherwise, the
f
eature is disabled.
Command Modes Global configuration (config)
Command History Release Modification
11.1CT This command was introduced.
12.0(10)ST This command was modified to reflect MPLS IETF command syntax and
te
rminology.
12.0(14)ST This command was integrated into Cisco IOS Release 12.0(14)ST.
12.1(2)T This command was integrated into Cisco IOS Release 12.1(2)T.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E and
i
mplemented on the Catalyst 6500 switch and the Cisco 7600 router.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(4)T This command was implemented on the Cisco MGX 8850 and MGX 8950
s
witches equipped with a Cisco MGX RPM-PR c.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S and
i
mplemented on the Cisco 10000(PRE-1) router.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
i
mplemented on the Cisco 10000-PRE2 router.
12.4(20)T This command was removed.