Specifications

mpls ldp backoff
MP-210
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls ldp backoff
To configure parameters for the label distribution protocol (LDP) backoff mechanism, use the mpls ldp
backoff command in global configuration mode. To disable this feature, use the no form of this
command.
mpls ldp backoff i
nitial-backoff maximum-backoff
no mpls ldp backoff in
itial-backoff maximum-backoff
Syntax Description
Defaults The initial backoff value is 15 seconds and grows to a maximum value of 120 seconds.
Command Modes Global configuration
Command History
initial-backoff Number from 5 to 2147483, inclusive, that defines the initial backoff value
in
seconds. The default is 15 seconds.
maximum-backoff Number from 5 to 2147483, inclusive, that defines the maximum backoff
v
alue in seconds. The default value is 120 seconds.
Release Modification
12.0(10)ST This command was introduced.
12.0(14)ST This command was integrated into Cisco IOS Release 12.0(14)ST.
12.1(2)T This command was integrated into Cisco IOS Release 12.1(2)T.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(4)T This command was implemented on the Cisco MGX 8850 and MGX 8950
s
witches equipped with a Cisco MGX RPM-PR card.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
i
mplemented on the Cisco 10000-PRE2 router.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.