Specifications

mpls ldp discovery transport-address
MP-215
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls ldp discovery transport-address
To specify the transport address advertised in the Label Distribution Protocol (LDP) discovery hello
messages sent on an interface, use the mpls ldp discovery transport-address command in interface
configuration mode. To disable this feature, use the no form of this command.
mpls ldp discovery transport-address {i
nterface | IP-address}
no mpls ldp discovery transport-address
Syntax Description
Command Default The default behavior when this command has not been issued for an interface depends on the interface
t
ype.
Unless the interface is a label-controlled ATM (LC-ATM) interface, LDP advertises its LDP router ID
a
s the transport address in LDP discovery hello messages sent from the interface.
If the interface is an LC-ATM interface, no transport address is explicitly advertised in LDP discovery
h
ello messages sent from the interface.
Command Modes Interface configuration (config-if)
Command History
interface Specifies that the interface IP address should be advertised as the transport
a
ddress.
IP-address IP address advertised as the transport address.
Release Modification
12.0(14)ST This command was introduced.
12.1(2)T This command was integrated into Cisco IOS Release 12.1(2)T.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(4)T This command was integrated into Cisco IOS Release 12.2(4)T.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.2(33)SCA This command was integrated into Cisco IOS Release 12.2(33)SCA.