Specifications

mpls ldp igp sync
MP-230
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
If you configure a new delay time while a timer is running, LDP saves the new delay time but does not
reconfigure the running timer.
Examples The following example shows how to disable MPLS LDP-IGP synchronization on POS interface 1/0:
Router(config)# interface pos1/0
Router(config-if)# no mpls ldp igp sync
The following example shows how to set a delay timer of 45 seconds for MPLS LDP-IGP
synchronization on FastEthernet interface 0/0:
Router(config)# interface FastEthernet 0/0
Router(config-if)# mpls ldp igp sync delay 45
Related Commands Command Description
mpls ldp sync Enables MPLS LDP-IGP synchronization on interfaces for an OSPF
pr
ocess or an IS-IS process.
show mpls ldp igp sync Displays the status of the MPLS LDP-IGP synchronization process.