Specifications

mpls ldp logging password rollover
MP-238
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls ldp logging password rollover
To enable the display password rollover events on an MPLS Label Switch Router (LSR), use the mpls
ldp logging password rollover command in global configuration mode. To disable the display of
password events, use the no form of this command.
mpls ldp logging password rollover [ra
te-limit num]
no mpls ldp logging password rollover
Syntax Description
Defaults Logging is disabled.
Command Modes Global configuration
Command History
Usage Guidelines The logging output displays events when a new password is used for authentication or when
a
uthentication is disabled.
Related Commands
rate-limit nu
m (Optional) Specifies a rate limit of 1 to 60 messages per minute.
Release Modification
12.0(33)S This command was introduced.
12.2(33)SRC This command was integrated in Cisco IOS Release 12.2(33)SRC.
12.2(33)SB This command was integrated in Cisco IOS Release 12.2(33)SB.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Command Description
mpls ldp logging password
conf
iguration
Enables the display password configuration change events on an
MPLS LSR.
mpls ldp neighbor password Configures a password key for computing MD5 checksums for the
se
ssion TCP connection with the specified neighbor.
mpls ldp password fallback Configures an MD5 password for LDP sessions with peers.
mpls ldp password option Configures an MD5 password for LDP sessions with neighbors
w
hose LDP router ID are permitted by a specified access list.
mpls ldp password required Specifies that LDP must use a password when establishing a session
b
etween LDP peers.
mpls ldp password rollover
durat
ion
Configures the duration before the new password takes effect on an
MPLS LSR.
service password-encryption Encrypts passwords.
show mpls ldp discovery Displays the status of the LDP discovery process.
show mpls ldp neighbor Displays the status of LDP sessions.