Specifications

mpls ldp neighbor password
MP-247
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls ldp neighbor password
To configure a password for computing message digest algorithm 5 (MD5) checksums for the session
TCP connection with the specified neighbor, use the mpls ldp neighbor password command in global
configuration mode. To disable this option for the specified neighbor, use the no form of this command.
mpls ldp neighbor [vr
f vpn-name] ip-address password password
no mpls ldp neighbor [vr
f vpn-name] ip-address [password password]
Syntax Description
Defaults Unless the TCP MD5 Signature Option is explicitly configured with the password for session TCP
co
nnections, the option is not used.
When the vr
f name is not specified in this command, the Label Distribution Protocol (LDP) neighbor is
configured in the default routing domain.
For the no f
orm of the command, if the password is not specified, all configuration information for the
specified neighbor reverts to the defaults and the neighbor record is deleted.
Command Modes Global configuration
Command History
vrf vp
n-name (Optional) VPN routing and forwarding instance for the specified neighbor.
ip-address Router ID (IP address) that identifies a neighbor.
password Password used for computing MD5 checksums for the session TCP
co
nnection with the specified neighbor.
Release Modification
12.0(10)ST This command was introduced.
12.0(14)ST This command was modified to reflect MPLS VPN support for LDP.
12.1(2)T This command was integrated into Cisco IOS Release 12.1(2)T.
12.1(8a)E This command was integrated into Cisco IOS Release 12.1(8a)E.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(4)T This command was integrated into Cisco IOS Release 12.2(4)T.
12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.0(23)S This command was integrated into Cisco IOS Release 12.0(23)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.0(33)S This command was integrated in Cisco IOS Release 12.0(33)S.
12.2(33)SB This command was integrated in Cisco IOS Release 12.2(33)SB.