Specifications

mpls ldp router-id
MP-264
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
• If you delete a VRF that you configured, the mpls ldp router-id command for the deleted VRF is
removed. The default VRF cannot be deleted.
Examples The following example shows that the POS2/0/0
interface has been specified as the preferred interface
for the LDP router ID. The IP address of that interface is used as the LDP router ID.
Router(config)# mpls ldp router-id pos2/0/0
The following example shows that the Ethernet 1/0 interface, which is associated with the VRF vpn-1,
is the preferred interface. The IP address of the interface is used as the LDP router ID.
Router(config)# mpls ldp router-id vrf vpn-1 eth1/0
Related Commands Command Description
show mpls ldp discovery Displays the status of the LDP discovery process.