Specifications

mpls prefix-map
MP-278
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls prefix-map
Note Effective with Cisco IOS Release 12.4(20)T, the mpls prefix-map command is not available in
Cisco IOS software.
To configure a router to use a specified quality of service (QoS) map when a label destination prefix
m
atches the specified access list, use the mpls pr
efix-map command in ATM subinterface submode.
mpls prefix-map pr
efix-map access-list access-list cos-map cos-map
Syntax Description
Defaults No access list is linked to a QoS map.
Command Modes ATM subinterface submode (config-subif)
Command History
Usage Guidelines This m
pls prefix-map command links an access list to a QoS map when a label distribution prefix
matches the specified access list.
Examples The following example shows how to link an access list to a QoS map:
Router(config-subif)# mpls prefix-map 55 access-list 55 cos-map 55
Related Commands
prefix-map Unique number for a prefix map.
access-list ac
cess list Unique number for a simple IP access list.
cos-map co
s-map Unique number for a QoS map.
Release Modification
12.0(5)T This command was introduced.
12.0(10)ST This command was modified to reflect Multiprotocol Label Switching
(
MPLS) Internet Engineering Task Force (IETF) syntax and terminology.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.4(20)T This command was removed.
Command Description
show mpls prefix-map Displays the prefix map used to assign a QoS map to network prefixes that
mat
ch a standard IP access list.