Specifications

mpls traffic-eng administrative-weight
MP-288
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls traffic-eng administrative-weight
To override the Interior Gateway Protocol (IGP) administrative weight (cost) of the link, use the mpls
traffic-eng administrative-weight command in interface configuration mode. To disable the override,
use the no form of this command.
mpls traffic-eng administrative-weight we
ight
no mpls traffic-eng administrative-weight
Syntax Description
Command Default None
Command Modes Interface configuration (config-if)
Command History
Examples The following example shows how to override the IGP cost of the link and set the cost to 20:
Router(config-if)# mpls traffic-eng administrative-weight 20
Related Commands
weight Cost of the link.
Release Modification
12.0(5)S This command was introduced.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.2(33)SCA This command was integrated into Cisco IOS Release 12.2(33)SCA.
Command Description
mpls traffic-eng attribute-flags Sets the user-specified attribute flags for an interface.