Specifications

mpls traffic-eng auto-tunnel mesh
MP-304
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls traffic-eng auto-tunnel mesh
To enable autotunnel mesh groups globally, use the mpls traffic-eng auto-tunnel mesh command in
global configuration mode. To disable autotunnel mesh groups globally, use the no form of this
command.
mpls traffic-eng auto-tunnel mesh
no mpls traffic-eng auto-tunnel mesh
Syntax Description This command has no arguments or keywords.
Command Default Autotunnel mesh groups are not enabled globally.
Command Modes Global configuration (config)#
Command History
Examples The following example shows how to enable autotunnel mesh groups globally:
Router(config)# mpls traffic-eng auto-tunnel mesh
Related Commands
Release Modification
12.0(27)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Command Description
interface auto-template Creates the template interface.