Specifications

mpls traffic-eng logging lsp
MP-327
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls traffic-eng logging lsp
To log certain traffic engineering label switched path (LSP) events, use the mpls traffic-eng logging lsp
command in global configuration mode. To disable logging of LSP events, use the no form of this
command.
mpls traffic-eng logging lsp {pat
h-errors | reservation-errors | preemption | setups |
teardowns} [acl-number]
no mpls traffic-eng logging lsp {pat
h-errors | reservation-errors | preemption | setups |
teardowns} [acl-number]
Syntax Description
Defaults Logging of LSP events is disabled.
Command Modes Global configuration
Command History
Examples The following example shows how to log path errors for LSPs that match access list 3:
Router(config)# mpls traffic-eng logging lsp path-errors 3
path-errors Logs RSVP path errors for traffic engineering LSPs.
reservation-errors Logs RSVP reservation errors for traffic engineering LSPs.
preemption Logs events related to the preemption of traffic engineering LSPs.
setups Logs events related to the establishment of traffic engineering LSPs.
teardowns Logs events related to the removal of traffic engineering LSPs.
acl-number (Optional) Uses the specified access list to filter the events that are logged.
L
ogs events only for LSPs that match the access list.
Release Modification
12.1(3)T This command was introduced.
12.0(10)ST This command was integrated into Cisco IOS Release 12.0(10)ST.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.