Specifications

mpls traffic-eng reoptimize
MP-342
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
mpls traffic-eng reoptimize
To force immediate reoptimization of all traffic engineering tunnels, use the mpls traffic-eng
reoptimize command in privileged EXEC mode.
mpls traffic-eng reoptimize
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Examples The following example shows how to reoptimize all traffic engineering tunnels immediately:
Router# mpls traffic-eng reoptimize
Related Commands
Release Modification
12.0(5)ST This command was introduced.
12.1(3)T This command was integrated into Cisco IOS Release 12.1(3)T.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Command Description
mpls traffic-eng reoptimize timers delay Delays removal of old LSPs or installation of new LSPs
af
ter tunnel reoptimization.