Specifications

oam retry
MP-377
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Related Commands Command Description
broadcast Configures broadcast packet duplication and transmission for an ATM VC
cl
ass, PVC, SVC, or VC bundle.
class-int Assigns a VC class to an ATM main interface or subinterface.
class-vc Assigns a VC class to an ATM PVC, SVC, or VC bundle member.
encapsulation Sets the encapsulation method used by the interface.
inarp Configures the Inverse ARP time period for an ATM PVC, VC class, or VC
b
undle.
oam-bundle Enables end-to-end F5 OAM loopback cell generation and OAM
ma
nagement for a virtual circuit class that can be applied to a virtual circuit
bundle.
oam-pvc Enables end-to-end F5 OAM loopback cell generation and OAM
ma
nagement for an ATM PVC or virtual circuit class.
oam-svc Enables end-to-end F5 OAM loopback cell generation and OAM
ma
nagement for an ATM SVC or virtual circuit class.
protocol (ATM) Configures a static map for an ATM PVC, SVC, VC class, or VC bundle.
En
ables Inverse ARP or Inverse ARP broadcasts on an ATM PVC by either
configuring Inverse ARP directly on the PVC, on the VC bundle, or in a VC
class (applies to IP and IPX protocols only).
ubr Configures UBR QoS and specifies the output peak cell rate for an ATM
PVC
, SVC, VC class, or VC bundle member.
ubr+ Configures UBR QoS and specifies the output peak cell rate and output
mi
nimum guaranteed cell rate for an ATM PVC, SVC, VC class, or VC
bundle member.
vbr-nrt Configures the VBR-NRT QoS and specifies output peak cell rate, output
sust
ainable cell rate, and output maximum burst cell size for an ATM PVC,
SVC, VC class, or VC bundle member.