Specifications

record-route (LSP Attributes)
MP-405
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
record-route (LSP Attributes)
To record the route used by the label switched path (LSP), use the record-route command in LSP
Attributes configuration mode. To stop the recording the route used by the LSP, use the no form of this
command.
record-route
no r
ecord-route
Syntax Description This command has no arguments or keywords.
Command Default The LSP route is not recorded.
Command Modes LSP Attributes configuration (config-lsp-attr)
Command History
Usage Guidelines Use this command to set up in an LSP attribute list the recording of the route taken by the LSP.
To associate the LSP record-route attribute and the LSP attribute list with a path option for an LSP, you
mu
st configure the tunnel mpls traffic-eng path option command with the attributes string keyword
and argument, where string is the identifier for the specific LSP attribute list.
Examples The following example shows how to set up LSP route recording in an LSP attribute list:
configure terminal
!
mpls traffic-eng lsp attributes 9
record-route
exit
end
Related Commands
Release Modification
12.0(26)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.
Command Description
mpls traffic-eng lsp attributes Creates or modifies an LSP attribute list.
show mpls traffic-eng lsp attributes Displays global LSP attribute lists.