Specifications

show atm vc
MP-426
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show atm vc
To display all ATM permanent virtual circuits (PVCs) and switched virtual circuits (SVCs) and traffic
information, use the show atm vc command in privileged EXEC mode.
show atm vc [vc
d | interface interface-number]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines If no value is specified for the vcd argument, the command displays information for all PVCs and SVCs.
The output is in summary form (one line per virtual circuit).
vcd (Optional) Specifies the virtual circuit descriptor (VCD) about which to
d
isplay information.
interface
int
erface-number
(Optional) Interface number or subinterface number of the PVC or SVC.
Displays all PVCs and SVCs on the specified interface or subinterface.
The in
terface-number uses one of the following formats, depending on
what router platform you are using:
• For the ATM Interface Processor (AIP) on Cisco 7500 series routers;
for the ATM port adapter, ATM-CES port adapter, and enhanced ATM
port adapter on Cisco 7200 series routers; for the 1-port ATM-25
net
work module on Cisco 2600 and 3600 series routers:
sl
ot/0[.subinterface-number multipoint]
• For the ATM port adapter and enhanced ATM port adapter on
Cisco 7500 series routers: slot/po
rt-adapter/0[.subinterface-number
multipoint]
• For the network processing module (NPM) on Cisco 4500 and
Cisco 4700 routers: nu
mber[.subinterface-number multipoint]
For a description of these arguments, refer to the i
nterface atm command.
Release Modification
10.0 This command was introduced.
11.1CA Information about VCs on an ATM-CES port adapter was added to the
co
mmand output.
12.0(5)T Information about VCs on an extended Multiprotocol Label Switching
(
MPLS) ATM interface was added to the command output.
12.2(25)S Information about packet drops and errors was added to the command
out
put.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
i
mplemented on the Cisco 10000 series routers.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.