Specifications

show atm vc
MP-431
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Type Type of VC, either PVC, SVC, TVC, or multipoint SVC (MSVC).
• MSVC (with no -x) indicates that VCD is a leaf of some other router’s
multipoint VC.
• MSVC-x indicates there are x leaf routers for that multipoint VC opened by
the root.
Type of PVC detected from PVC discover
y, either PVC-D, PVC-L, or PVC-M.
• PVC-D indicates a PVC created due to PVC discovery.
• PVC-L indicates that the corresponding peer of this PVC could not be
found on the switch.
• PVC-M indicates that some or all of the quality of service (QoS) parameters
of this PVC do not match those of the corresponding peer on the switch.
• TVC indicates a Tag VC.
Encaps Type of ATM adaptation layer (AAL) and encapsulation.
PeakRate Kilobits per second sent at the peak rate.
Average Rate Kilobits per second sent at the average rate.
Burst Cells Value that equals the maximum number of ATM cells the VC can send at peak
ra
te.
Status Status of the VC connection.
• UP indicates that the connection is enabled for data traffic.
• DOWN indicates that the connection is not ready for data traffic. When the
Status field is DOWN, a State field is shown.
• INACTIVE indicates that the interface is down.
• ACTIVE indicates that the interface is in use and active.
etype Encapsulation type.
Table 14 show atm vc Field Descriptions (continued)
Field Description