Specifications

show connection
MP-434
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show connection
To display the status of interworking connections, use the show connection command in privileged
EXEC mode.
show connection [al
l | element | id ID | name name | port port]
Syntax Description
Command Modes Privileged EXEC
Command History
Examples The following example shows the local interworking connections on a router:
Router# show connection
ID Name Segment 1 Segment 2 State
========================================================================
1 conn1 ATM 1/0/0 AAL5 0/100 ATM 2/0/0 AAL5 0/100 UP
all (Optional) Displays information about all interworking connections.
element (Optional) Displays information about the specified connection element.
id ID (Optional) Displays information about the specified connection identifier.
name na
me (Optional) Displays information about the specified connection name.
port po
rt (Optional) Displays information about all connections on an interface. (In
Cisco IOS Release 12.0S, only ATM, serial, and Fast Ethernet are shown.)
Release Modification
12.1(2)T This command was introduced as show
connect (FR-ATM).
12.0(27)S This command was integrated into Cisco IOS Release 12.0(27)S and updated
to
show all ATM, serial, and Fast Ethernet interworking connections.
12.4(2)T The command output was modified to add Segment 1 and Segment 2 fields for
Se
gment state and channel ID.
12.0(30)S This command was integrated into Cisco IOS Release 12.0(30)S.
12.2(25)S This command was integrated into Cisco IOS Release 12.2(25)S.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.4(8) This command was integrated into Cisco IOS Release 12.4(8).
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.4(11)T This command was integrated into Cisco IOS Release 12.4(11)T.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support in
a
specific 12.2SX release of this train depends on your feature set, platform,
and platform hardware.
12.2(33)SB This command was updated to display High-Level Data Link Control (HDLC)
lo
cal switching connections.
Cisco IOS XE
Re
lease 2.5
This command was integrated into Cisco IOS XE Release 2.5.