Specifications

show connection
MP-435
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
2 conn2 ATM 2/0/0 AAL5 0/300 Serial0/1 16 UP
3 conn3 ATM 2/0/0 AAL5 0/400 FA 0/0.1 10 UP
4 conn4 ATM 1/0/0 CELL 0/500 ATM 2/0/0 CELL 0/500 UP
5 conn5 ATM 1/0/0 CELL 100 ATM 2/0/0 CELL 100 UP
Table 15 describes the significant fields shown in the display.
Related Commands
Ta b l e 15 show connection Field Descriptions
Field Description
ID Arbitrary connection identifier assigned by the operating system.
Name Name of the connection.
Segment 1
Segment 2
Information about the interworking segments:
• Interface name and number.
• Segment state, interface name and number, and channel ID.
Segment state will displays nothing if the segment state is UP,
“-” if the segment state is DOWN, and “***Card Removed***”
if the segment state is DETACHED.
• Type of encapsulation (if any) assigned to the interface.
• Permanent virtual circuit (PVC) assigned to the ATM interface,
data-link connection identifier (DLCI) assigned to the serial
interface, or VLAN ID assigned to the Ethernet interface.
State Status of the connection, which is one of the following: INVALID,
U
P, ADMIN UP, ADMIN DOWN, OPER DOWN, COMING UP,
NOT VERIFIED, ERR.
Command Description
connect (L2VPN local switching) Connects two different or like interfaces on a router.
show atm pvc Displays the status of ATM PVCs and SVCs.
show frame-relay pvc Displays the status of Frame Relay interfaces.