Specifications

show interface tunnel configuration
MP-454
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Related Commands
no keepalive Indicates that no keepalives are set for the mesh tunnel
interface.
tunnel destination access-list 1 Indicates that access-list 1 is the access list that the template
i
nterface will use for obtaining the mesh tunnel interface
destination address.
tunnel mode mpls traffic-eng Indicates that the mode of the mesh tunnel is set to
M
ultiprotocol Label Switching (MPLS) for traffic
engineering.
tunnel mpls traffic-eng autoroute
a
nnounce
Indicates that the Interior Gateway Protocol (IGP) should use
the tunnel (if the tunnel is up) in its enhanced shortest path
first (SPF) calculation.
tunnel mpls traffic-eng path-option 1
d
ynamic
Indicates that a path option (path-option1) for the label
switch router (LSR) for the MPLS traffic engineering (TE)
mesh tunnel is configured dynamically.
Table 24 show interface tunnel configuration Field Descriptions (continued)
Field Description
Command Description
tunnel destination access-list Specifies the access list that the template interface will use for
o
btaining the mesh tunnel interface destination address.