Specifications

show interface xtagatm
MP-457
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
reliability Reliability of the interface as a fraction of 255 (255/255 is 100%
reliability), calculated as an exponential average over 5 minutes.
Encapsulation ATM Encapsulation method.
loopback not set Indicates that loopback is not set.
Keepalive set (10 sec)
[
00:00:08/4]
Indicates why the Xtag line is down. Valid values are:
1—Internal usage.
2—Administratively down.
3—Internal usage.
4—No extended port is configured.
5—Some cross-connects from an old session have been left operational.
6—No extended port or a wrong extended port was configured.
7—No control port was configured.
8—Internal usage.
9—Internal usage.
10—Internal usage.
11—Internal usage.
12—External port. The XTag is mapped to an invalid port on the switch.
13—External port. The XTag is mapped to a port that is down.
14—External port is mapped to the control panel on the switch.
15—OAM is being used to track the link state. The neighbor may be down
o
r it is not responding to the OAM calls.
Encapsulation(s) Identifies the ATM adaptation layer.
Control interface Identifies the control port switch port with which the extended MPLS ATM
i
nterface has been associated through the extended-port interface
configuration command.
n ter
minating VCs Number of terminating VCs with an endpoint on this extended MPLS ATM
interface. Packets are sent or received by the MPLS LSC on a terminating
VC, or are forwarded between an LSC-controlled switch port and a router
interface.
7 switch cross-connects Number of switch cross-connects on the external switch with an endpoint
o
n the switch port that corresponds to this interface. This includes
cross-connects to terminating VCs that carry data to and from the LSC, and
cross-connects that bypass the MPLS LSC and switch cells directly to other
ports.
Switch port traffic Number of cells received and sent on all cross-connects associated with this
in
terface.
Terminating traffic Indicates that counters below this line apply only to packets sent or received
on t
erminating VCs.
Table 25 show interface xtagatm Field Descriptions
Field Description