Specifications

show ip bgp vpnv4
MP-475
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
summary (Optional) Displays BGP neighbor status.
labels (Optional) Displays incoming and outgoing BGP labels for each
NL
RI prefix.
Release Modification
12.0(5)T This command was introduced.
12.2(2)T The output of the s
how ip bgp vpnv4 all ip-prefix command was enhanced to
display attributes including multipaths and a best path to the specified network.
12.0(21)ST The t
ags keyword was replaced by the labels keyword to conform to the MPLS
guidelines. This command was integrated into Cisco IOS Release 12.0(21)ST.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.0(22)S This command was integrated into Cisco IOS Release 12.0(22)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.0(27)S The output of the s
how ip bgp vpnv4 all labels command was enhanced to
display explicit-null label information.
12.3 The rib-
failure keyword was added for VRFs.
12.2(22)S The output of the s
how ip bgp vpnv4 vrf vrf-name labels command was
modified so that directly connected VRF networks no longer display as
aggregate; no label appears instead.
12.2(25)S This command was updated to display MPLS VPN nonstop forwarding
in
formation.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
i
mplemented on the Cisco 10000 series router. The display output was modified
to indicate whether BGP Nonstop Routing (NSR) with stateful switchover (SSO)
is enabled and the reason the last BGP lost SSO capability.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA, and the
o
utput was modified to support per-VRF assignment of the BGP router ID.
12.2(31)SB2 The output was modified to support per-VRF assignment of the BGP router ID.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH, and the
o
utput was modified to support per-VRF assignment of the BGP router ID.
Note In Cisco IOS Release 12.2(33)SXH, the command output does not
display on the standby route processor in NSF/SSO mode.
12.4(20)T The output was modified to support per-VRF assignment of the BGP router ID.
15.0(1)M This command was modified. The output was modified to support BGP
E
vent-Based VPN Import.
12.2(33)SRE This command was modified. The command output was modified to support the
B
GP Event-Based VPN Import, BGP best external and BGP additional path
features.