Specifications

show ip bgp vpnv4
MP-482
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
not match the RTs imported by the specified VRF. In this situation, the imported path is marked as
“not-in-vrf” as shown in the output. Note that on the net for vrf-A, this path is not the bestpath as any
paths that are not in the VRFs appear less attractive than paths in the VRF.
Router# show ip bgp vpnv4 all 172.17.0.0
BBGP routing table entry for 45000:1:172.17.0.0/16, version 11
Paths: (2 available, best #2, table vrf-A)
Flag: 0x820
Not advertised to any peer
2
10.0.101.2 from 10.0.101.2 (10.0.101.2)
Origin IGP, metric 100, localpref 100, valid, internal, not-in-vrf
Extended Community: RT:45000:200
mpls labels in/out nolabel/16
2
10.0.101.1 from 10.0.101.1 (10.0.101.1)
Origin IGP, metric 50, localpref 100, valid, internal, best
Extended Community: RT:45000:100
mpls labels in/out nolabel/16
Related Commands Command Description
import path limit Specifies the maximum number of BGP paths, per VRF importing net, that
c
an be imported from an exporting net.
import path selection Specifies the BGP import path selection policy for a specific VRF instance.
show ip vrf Displays the set of defined VRFs and associated interfaces.