Specifications

show ip explicit-paths
MP-483
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip explicit-paths
To display the configured IP explicit paths, use the show ip explicit-paths command in user EXEC or
privileged EXEC mode.
show ip explicit-paths [na
me pathname | identifier number] [detail]
Syntax Description
Command Default If you enter the command without entering an optional keyword, all configured IP explicit paths are
di
splayed.
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History
Usage Guidelines An IP explicit path is a list of IP addresses, each representing a node or link in the explicit path.
Examples The following is sample output from the sho
w ip explicit-paths command:
Router# show ip explicit-paths
PATH 200 (strict source route, path complete, generation 6)
1: next-address 10.3.28.3
2: next-address 10.3.27.3
name pathname (Optional) Displays the pathname of the explicit path.
identifier nu
mber (Optional) Displays the number of the explicit path. Valid values are from
1 to 65535.
detail (Optional) Displays, in the long form, information about the configured IP
e
xplicit paths.
Release Modification
12.0(5)S This command was introduced.
12.1(3)T This command was integrated into Cisco IOS Release 12.1(3)T.
12.0(10)ST This command was integrated into Cisco IOS Release 12.0(10)ST.
12.2(28)SB The command output was enhanced to display SLRG-releated information.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
12.4(20)T This command was integrated into Cisco IOS Release 12.4(20)T.