Specifications

show ip multicast mpls vif
MP-485
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip multicast mpls vif
To display the virtual interfaces (VIFs) that are created on the Multiprotocol Label Switching (MPLS)
traffic engineering (TE) point-to-multipoint (P2MP) tailend router, use the show ip multicast mpls vif
command in privileged EXEC mode.
show ip multicast mpls vif
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC (#)
Command History
Examples The following example shows information about the virtual interfaces:
Router# show ip multicast mpls vif
Interface Next-hop Application Ref-Count Table / VRF name
Lspvif0 10.1.0.1 Traffic-eng 1 default
Lspvif4 10.2.0.1 Traffic-eng 1 default
Table 40 describes the significant fields shown in the display.
Related Commands
Release Modification
12.2(33)SRE This command was introduced.
Ta b l e 40 show ip multicast mpls vif Field Descriptions
Field Description
Interface The name of the virtual interface
Next-hop For P2MP TE, the source address of the TE P2MP tunnel.
O
nly one label switched path (LSP) VIF is created for all TE
P2MP tunnels that have the same source address.
Application The name of the multicast application that creates the VIF.
Table/VRF name The multicast virtual routing and forwarding (VRF) table
use
d.
Command Description
show ip mroute Displays IP multicast traffic.