Specifications

show ip ospf database opaque-area
MP-486
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip ospf database opaque-area
To display lists of information related to traffic engineering opaque link-state advertisements (LSAs),
also known as Type-10 opaque link area link states, use the show ip ospf database opaque-area
command in user EXEC or privileged EXEC mode.
show ip ospf database opaque-area
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the sho
w ip ospf database opaque-area command:
Router# show ip ospf database opaque-area
OSPF Router with ID (10.3.3.3) (Process ID 1)
Type-10 Opaque Link Area Link States (Area 0)
LS age: 12
Options: (No TOS-capability, DC)
LS Type: Opaque Area Link
Link State ID: 10.0.0.0
Opaque Type: 1
Opaque ID: 0
Advertising Router: 172.16.8.8
LS Seq Number: 80000004
Checksum: 0xD423
Length: 132
Fragment number : 0
MPLS TE router ID: 172.16.8.8
Link connected to Point-to-Point network
Link ID : 10.2.2.2
Interface Address : 192.168.1.1
Release Modification
12.0(8)S This command was introduced.
12.1(3)T This command was integrated into Cisco IOS Release 12.1(3)T.
12.0(10)ST This command was integrated into Cisco IOS Release 12.0(10)ST.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.