Specifications

show ip ospf mpls ldp interface
MP-488
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip ospf mpls ldp interface
To display information about interfaces belonging to an Open Shortest Path First (OSPF) process that is
configured for Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP) Interior
Gateway Protocol (IGP), use the show ip ospf mpls ldp interface command in privileged EXEC mode.
show ip ospf [pr
ocess-id] mpls ldp interface [interface]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines This command shows MPLS LDP-IGP synchronization inf
ormation for specified interfaces or OSPF
processes. If you do not specify an argument, information is displayed for each interface that was
configured for MPLS LDP-IGP synchronization.
Examples The following is sample output from the sho
w ip ospf mpls ldp interface command:
Router# show ip ospf mpls ldp interface
Serial1/2.4
Process ID 2, Area 0
LDP is configured through LDP autoconfig
LDP-IGP Synchronization : Not required
Holddown timer is disabled
Interface is up
Serial1/2.11
Process ID 6, VRF VFR1, Area 2
LDP is configured through LDP autoconfig
LDP-IGP Synchronization : Not required
Holddown timer is disabled
Interface is up
Ethernet2/0
Process ID 1, Area 0
LDP is configured through LDP autoconfig
LDP-IGP Synchronization : Required
Holddown timer is configured : 1 msecs
Holddown timer is not running
process-id (Optional) Process ID. Includes information only for the specified routing
process.
interface (Optional) Defines the interface for which MPLS LDP-IGP synchronization
i
nformation is displayed.
Release Modification
12.0(30)S This command was introduced.
12.3(14)T This command was integrated into Cisco IOS Release 12.3(14)T.
12.2(33)SRB This command was integrated into Cisco IOS Release 12.2(33)SRB.
12.2(33)SB This command was integrated into Cisco IOS Release 12.2(33)SB.