Specifications

show ip ospf mpls ldp interface
MP-489
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Interface is up
Loopback1
Process ID 1, Area 0
LDP is not configured through LDP autoconfig
LDP-IGP Synchronization : Not required
Holddown timer is disabled
Interface is up
Serial1/2.1
Process ID 1, Area 10.0.1.44
LDP is configured through LDP autoconfig
LDP-IGP Synchronization : Required
Holddown timer is configured : 1 msecs
Holddown timer is not running
Interface is up
Table 42 describes the significant fields shown in the display.
Related Commands
Ta b l e 42 show ip ospf mpls ldp interface Field Descriptions
Field Description
Process ID The number of the OSPF process to which the interface belongs.
Area The OSPF area to which the interface belongs.
LDP is configured
th
rough
The means by which LDP was configured on the interface. LDP can be
configured on the interface by the mpls ip or mpls ldp command.
LDP-IGP
Sy
nchronization
Indicates whether MPLS LDP-IGP synchronization was enabled on this
interface.
Holddown timer Indicates whether the hold-down timer was specified for this interface.
Command Description
debug mpls ldp igp sync Displays events related to MPLS LDP-IGP
sy
nchronization.
show mpls ldp igp sync Displays the status of the MPLS LDP-IGP synchronization
p
rocess.