Specifications

show ip ospf mpls traffic-eng
MP-490
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip ospf mpls traffic-eng
To display information about the links available on the local router for traffic engineering, use the show
ip ospf mpls traffic-eng command in user EXEC or privileged EXEC mode.
show ip ospf [pr
ocess-id [area-id] mpls traffic-eng [link] | fragment]
Syntax Description
Defaults No default behavior or values.
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the sho
w ip ospf mpls traffic-eng command:
Router# show ip ospf mpls traffic-eng link
OSPF Router with ID (10.0.0.1) (Process ID 1)
Area 0 has 2 MPLS TE links. Area instance is 14.
Links in hash bucket 8.
Link is associated with fragment 1. Link instance is 14
Link connected to Point-to-Point network
Link ID :197.0.0.1
Interface Address :172.16.0.1
Neighbor Address :172.16.0.2
Admin Metric :97
process-id (Optional) Internal identification number that is assigned locally when the
OSPF routing process is enabled. The value can be any positive integer.
area-id (Optional) Area number associated with OSPF.
link (Optional) Provides detailed information about the links over which traffic
e
ngineering is supported on the local router.
fragment (Optional) Provides detailed information about the traffic engineering
f
ragments on the local router.
Release Modification
12.0S This command was introduced.
12.1(3)T This command was integrated into Cisco IOS Release 12.1(3)T.
12.0(10)ST This command was integrated into Cisco IOS Release 12.0(10)ST.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.