Specifications

show ip ospf mpls traffic-eng
MP-491
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Maximum bandwidth :128000
Maximum reservable bandwidth :250000
Number of Priority :8
Priority 0 :250000 Priority 1 :250000
Priority 2 :250000 Priority 3 :250000
Priority 4 :250000 Priority 5 :250000
Priority 6 :250000 Priority 7 :212500
Affinity Bit :0x0
Link is associated with fragment 0. Link instance is 14
Link connected to Broadcast network
Link ID :192.168.1.2
Interface Address :192.168.1.1
Neighbor Address :192.168.1.2
Admin Metric :10
Maximum bandwidth :1250000
Maximum reservable bandwidth :2500000
Number of Priority :8
Priority 0 :2500000 Priority 1 :2500000
Priority 2 :2500000 Priority 3 :2500000
Priority 4 :2500000 Priority 5 :2500000
Priority 6 :2500000 Priority 7 :2500000
Affinity Bit :0x0
Table 43 describes the significant fields shown in the display.
Ta b l e 43 show ip ospf mpls traffic-eng Field Descriptions
Field Description
OSPF Router with ID Router identification number.
Process ID OSPF process identification.
Area instance Number of times traffic engineering information or any link
c
hanged.
Link instance Number of times any link changed.
Link ID Link-state ID.
Interface Address Local IP address on the link.
Neighbor Address IP address that is on the remote end of the link.
Admin Metric Traffic engineering link metric.
Maximum bandwidth Bandwidth set by the band
width interface command in the
interface configuration mode.
Maximum reservable bandwidth Bandwidth available for traffic engineering on this link. This value
is
set in the ip rsvp command in the interface configuration mode.
Number of priority Number of priorities that are supported.
Priority Bandwidth (in bytes per second) that is available for traffic
e
ngineering at certain priorities.
Affinity Bit Affinity bits (color) assigned to the link.