Specifications

show ip protocols vrf
MP-492
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip protocols vrf
To display the routing protocol information associated with a Virtual Private Network (VPN) routing and
forwarding (VRF) instance, use the show ip protocols vrf command in user EXEC or privileged EXEC
mode.
show ip protocols vrf vr
f-name summary
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines Use this command to display routing information associated with a VRF.
Examples The following example shows information about a VRF named vpn1:
Router# show ip protocols vrf vpn1
Routing Protocol is "bgp 100"
Sending updates every 60 seconds, next due in 0 sec
Outgoing update filter list for all interfaces is
Incoming update filter list for all interfaces is
IGP synchronization is disabled
Automatic route summarization is disabled
Redistributing:connected, static
Routing for Networks:
Routing Information Sources:
Gateway Distance Last Update
10.13.13.13 200 02:20:54
10.18.18.18 200 03:26:15
Distance:external 20 internal 200 local 200
vrf-name Name assigned to a VRF.
summary Displays the routing protocol information in summary format.
Release Modification
12.0(5)T This command was introduced.
12.0(21)ST This command was integrated into Cisco IOS Release 12.0(21)ST.
12.0(22)S The summary k
eyword was added. EIGRP VRF support was added.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(18)S This command was integrated into Cisco IOS Release 12.2(18)S.
12.2(27)SBC This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.