Specifications

show ip route vrf
MP-502
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip route vrf
To display the IP routing table associated with a Virtual Private Network (VPN) routing and forwarding
(VRF) instance, use the show ip route vrf command in user EXEC or privileged EXEC mode.
show ip route vrf vrf
-name [connected] [protocol [as-number] [tag] [output-modifiers]] [ip-prefix]
[list number [output-modifiers]] [profile] [static [output-modifiers]] [summary
[output-modifiers]] [supernets-only [output-modifiers]]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
vrf-name Name assigned to the VRF.
connected (Optional) Displays all connected routes in a VRF.
protocol (Optional) To specify a routing protocol, use one of the following
k
eywords: bgp, egp, eigrp, hello, igrp, isis, ospf, or rip.
as-number (Optional) Autonomous system number.
tag (Optional) Cisco IOS routing area label.
output-modifiers (Optional) For a list of associated keywords and arguments, use
c
ontext-sensitive help.
ip-prefix (Optional) Specifies a network to display.
list nu
mber (Optional) Specifies the IP access list to display.
profile (Optional) Displays the IP routing table profile.
static (Optional) Displays static routes.
summary (Optional) Displays a s
ummary of routes.
supernets-only (Optional) Displays supernet entries only.
Release Modification
12.0(5)T This command was introduced.
12.2(2)T The ip
-prefix argument was added. The output from the show ip route vrf
vrf-name ip-prefix command was enhanced to display information on the
multipaths to the specified network.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.0(22)S Enhanced Interior Gateway Routing Protocol (EIGRP) VRF support was
ad
ded.
12.2(15)T EIGRP VRF support was integrated into Cisco IOS Release 12.2(15)T.
12.2(18)S EIGRP VRF support was integrated into Cisco IOS Release 12.2(18)S.
12.2(27)SBC This command was integrated into Cisco IOS Release 12.2(27)SBC.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH The output was enhanced to display remote label information and
co
rresponding MPLS flags for prefixes that have remote labels stored in the
Routing Information Base (RIB).