Specifications

show ip rsvp fast bw-protect
MP-506
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip rsvp fast bw-protect
To display information about whether backup bandwidth protection is enabled and the status of backup
tunnels that may be used to provide that protection, use the show ip rsvp fast bw-protect command in
user EXEC or privileged EXEC mode.
show ip rsvp fast bw-protect
Syntax Description This command has no arguments or keywords.
Command Default The backup bandwidth protection and backup tunnel status information is not displayed.
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the s
how ip rsvp fast bw-protect command:
Router# show ip rsvp fast bw-protect
Primary Protect BW Backup
Tunnel I/F BPS:Type Tunnel:Label State BW-P Type
-------------- ------- -------- ---------- ----- ---- ----
PRAB-72-5_t500 PO2/0 500K:S Tu501:19 Ready ON Nhop
PRAB-72-5_t601 PO2/0 103K:S Tu501:20 Ready OFF Nhop
PRAB-72-5_t602 PO2/0 70K:S Tu501:21 Ready ON Nhop
PRAB-72-5_t603 PO2/0 99K:S Tu501:22 Ready ON Nhop
PRAB-72-5_t604 PO2/0 100K:S Tu501:23 Ready OFF Nhop
PRAB-72-5_t605 PO2/0 101K:S Tu501:24 Ready OFF Nhop
Table 49 describes the significant fields shown in the display.
Release Modification
12.0(29)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
i
n a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Ta b l e 49 show ip rsvp fast bw-protect Field Descriptions
Field Description
Primary Tunnel Identification of the tunnel being protected.
Protect I/F Interface name.