Specifications

show ip rsvp fast detail
MP-508
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip rsvp fast detail
To display specific information for Resource Reservation Protocol (RSVP) categories, use the show ip
rsvp fast detail command in user EXEC or privileged EXEC mode.
show ip rsvp fast detail
Syntax Description This command has no arguments or keywords.
Command Default Specific information for RSVP categories is not displayed.
Command Modes User EXEC
Privileged EXEC’
Command History
Examples The following is sample output from the sho
w ip rsvp fast detail command:
Router# show ip rsvp fast detail
PATH:
Tun Dest: 10.0.0.7 Tun ID: 500 Ext Tun ID: 10.0.0.5
Tun Sender: 10.0.0.5 LSP ID: 8
Path refreshes:
sent: to NHOP 10.5.6.6 on POS2/0
Session Attr:
Setup Prio: 7, Holding Prio: 7
Flags: Local Prot desired, Label Recording, SE Style, Bandwidth Prot desired
Session Name: PRAB-72-5_t500
ERO: (incoming)
10.0.0.5 (Strict IPv4 Prefix, 8 bytes, /32)
555.5.6.6 (Strict IPv4 Prefix, 8 bytes, /32)
555.6.7.7 (Strict IPv4 Prefix, 8 bytes, /32)
10.0.0.7 (Strict IPv4 Prefix, 8 bytes, /32)
ERO: (outgoing)
555.5.6.6 (Strict IPv4 Prefix, 8 bytes, /32)
555.6.7.7 (Strict IPv4 Prefix, 8 bytes, /32)
10.0.0.7 (Strict IPv4 Prefix, 8 bytes, /32)
Traffic params - Rate: 500K bits/sec, Max. burst: 1K bytes
Min Policed Unit: 0 bytes, Max Pkt Size 4294967295 bytes
Fast-Reroute Backup info:
Inbound FRR: Not active
Outbound FRR: Ready -- backup tunnel selected
Backup Tunnel: Tu501 (label 19)
Bkup Sender Template:
Tun Sender: 555.5.6.5 LSP ID: 8
Release Modification
12.0(24)S This command was introduced
12.0(29)S Bandwidth Prot desired was added in the Flag field of the command output.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.