Specifications

show ip rsvp hello bfd nbr
MP-513
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip rsvp hello bfd nbr
To display information about all Multiprotocol Label Switching (MPLS) traffic engineering (TE) clients
that use the Bidirectional Forwarding Detection (BFD) protocol, use the show ip rsvp hello bfd nbr
command in user EXEC or privileged EXEC mode.
show ip rsvp hello bfd nbr
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines The command output is the same as the show
ip rsvp hello bfd nbr summary command output.
Examples The following is sample output from the sho
w ip rsvp hello bfd nbr command.
Router# show ip rsvp hello bfd nbr
Client Neighbor I/F State LostCnt LSPs
FRR 10.0.0.6 Gi9/47 Up 0 1
Table 52 describes the significant fields shown in the display.
Release Modification
12.2(33)SRC This command was introduced.
Ta b l e 52 show ip rsvp hello bfd nbr Field Descriptions
Field Description
Client MPLS TE feature that is using the BFD protocol.
Neighbor IP address of the next-hop (that is, the neighbor).
I/F Outbound (egress) interface name.
State Status of the BFD session (Up, Down, or Lost).
LostCnt Number of times that the BFD session is lost
(dr
opped) on this interface.
LSPs Number of label-switched paths (LSPs) that BFD
i
s protecting on this interface.