Specifications

show ip rsvp hello bfd nbr detail
MP-515
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip rsvp hello bfd nbr detail
To display detailed information about all Multiprotocol Label Switching (MPLS) traffic engineering
(TE) clients that use the Bidirectional Forwarding Detection (BFD) protocol, use the show ip rsvp hello
bfd nbr detail command in user EXEC or privileged EXEC mode.
show ip rsvp hello bfd nbr detail
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the sho
w ip rsvp hello bfd nbr detail command:
Router# show ip rsvp hello bfd nbr detail
Hello Client Neighbors
Remote addr 10.0.0.6, Local addr 10.0.0.7
Type: Active
I/F: Gi9/47
State: Up (for 00:09:41)
Clients: FRR
LSPs protecting: 1 (frr: 1, hst upstream: 0 hst downstream: 0)
Communication with neighbor lost: 0
Table 53 describes the significant fields shown in the display.
Release Modification
12.2(33)SRC This command was introduced.
Ta b l e 53 show ip rsvp hello bfd nbr detail Field Descriptions
Field Description
Remote addr IP address of the next hop interface.
Local addr IP address of the outbound interface.
Type Type of signaling that is in effect (Active or Passive).
I/F Interface name.
State Status of the BFD session (Up, Down, or Lost).
Clients Software that is using the BFD protocol.
LSPs protecting Number of label-switched paths (LSPs) that the BFD
pr
otocol is protecting.
Communication with neighbor lost Number of times the BFD protocol detected that a link was
do
wn.