Specifications

show ip rsvp hello bfd nbr summary
MP-517
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
show ip rsvp hello bfd nbr summary
To display summarized information about all Multiprotocol Label Switching (MPLS) traffic engineering
(TE) clients that use the Bidirectional Forwarding Detection (BFD) protocol, use the show ip rsvp hello
bfd nbr summary command in user EXEC or privileged EXEC mode.
show ip rsvp hello bfd nbr summary
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXE C
Command History
Usage Guidelines The command output is the same as the show
ip rsvp hello bfd nbr command output.
Examples The following is sample output from the sho
w ip rsvp hello bfd nbr summary command.
Router# show ip rsvp hello bfd nbr summary
Client Neighbor I/F State LostCnt LSPs
FRR 10.0.0.6 Gi9/47 Up 0 1
Table 54 describes the significant fields shown in the display.
Release Modification
12.2(33)SRC This command was introduced.
Ta b l e 54 show ip rsvp hello bfd nbr summary Field Descriptions
Field Description
Client MPLS TE feature that uses the BFD protocol.
Neighbor IP address of the next hop (that is, the neighbor).
I/F Interface type and slot or port.
State Status of the BFD session (Up, Down, or Lost).
LostCnt Number of times that the BFD session is lost (dropped) on this
in
terface.
LSPs Number of label-switched paths (LSPs) that BFD is protecting on
th
is interface.