Specifications

show ip rsvp high-availability database
MP-530
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
State Status of an entry. Values are as follows:
• Ack-Pending—Entries have been sent, but not
acknowledged.
• Checkpointed—Entries have been sent and
acknowledged by the standby RP.
• Send-Pending—Entries are waiting to be sent.
Action Action taken. Values are as follows:
• Add—Adding an item to the standby RP.
• Delete—Deleting an item from the standby RP. This
action appears temporarily while the active RP awaits an
ack of the delete operation.
• Modify—Modifying an item on the standby RP.
• Remove—Removing an item from the standby RP.
Seq # Numbers used by the active and standby RPs to synchronize
me
ssage acks and nacks to messages sent.
Flags Attribute used to identify or track data.
Data Information.
Ifnumber Interface number.
Link Valid Flags Attributes used to identify or track links.
Link Subnet Type Subnet type of the link. Values are as follows:
• Broadcast—Data for multiple recipients.
• Nonbroadcast Multiaccess—A network in which data is
transmitted directly from one computer to another over a
virtual circuit or across a switching fabric.
• Point-to-Multipoint—Unidirectional connection in
which a single source end system (known as a root node)
connects to multiple destination end systems (known as
leaves).
• Point-to-Point—Unidirectional or bidirectional
connection between two end systems.
• Unknown subnet type—Subnet type not identified.
Local Intfc ID Local interface identifier.
Neighbor Intf ID Neighbor’s interface identifier.
Link IP Address IP address of the link.
Neighbor IGP System ID Neighbor system identifier configured using IGP.
Neighbor IP Address Neighbor’s IP address.
IGP Metric Metric value for the TE link configured using IGP.
Table 59 show ip rsvp high-availability database link-management interfaces—Active RP Field
Descriptions (continued)
Field Description