Specifications

show ip rsvp high-availability database
MP-532
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
Table 60 describes the significant fields shown in the display.
The fields for a standby RP are the same as those described in Ta
ble 60 except they are now in the TE
system read database instead of the TE system write database that is used by an active RP.
Ta b l e 60 show ip rsvp high-availability database link-management system—Active RP Field
Descriptions
Field Description
TE SYSTEM WRITE DB Storage area for active TE RP system data. This field is blank
on a st
andby RP.
Flooding Protocol Protocol that is flooding information for this area. OSPF =
O
pen Shortest Path First.
IGP Area ID IGP identifier for the area being flooded.
Header Header information.
State Status of an entry. Values are as follows:
• Ack-Pending—Entries have been sent, but not
acknowledged.
• Checkpointed—Entries have been sent and
acknowledged by the standby RP.
• Send-Pending—Entries are waiting to be sent.
Action Action taken. Values are as follows:
• Add—Adding an item to the standby RP.
• Delete—Deleting an item from the standby RP. This
action appears temporarily while the active RP awaits an
ack of the delete operation.
• Modify—Modifying an item on the standby RP.
• Remove—Removing an item from the standby RP.
Seq # Numbers used by the active and standby RPs to synchronize
me
ssage acks and nacks to messages sent.
Flags Attribute used to identify or track data.
Data Information.
LM Flood Data Link management (LM) flood data.
LSA Valid flags Link-state advertisement (LSA) attributes.
Node LSA flag LSA attributes used by a router.
IGP System ID Identification (IP address) that IGP flooding uses in this area
t
o identify this node.
MPLS TE Router ID MPLS TE router identifier (IP address).
Flooded links Number of flooded links.
TLV length TLV length in bytes.
Fragment id Fragment identifier for this link.
TE SYSTEM READ DB Storage area for standby TE RP system data. This field is
bl
ank on a standby RP.