Specifications

show ip rsvp high-availability database
MP-533
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
LSP Example on an Active RP
The following is sample output from the show ip rsvp high-availability database lsp command on an
active RP:
Router# show ip rsvp high-availability database lsp
LSP WRITE DB
Tun ID: 10 LSP ID: 8
Dest: 10.0.0.9
Sender: 10.0.0.3 Ext. Tun ID: 10.0.0.3
Header:
State: Checkpointed Action: Add
Seq #: 3 Flags: 0x0
Data:
InLabel: -
Out I/F: Gi3/2
Next-Hop: 172.16.3.1
OutLabel: 17
Loose hop info:
10.0.0.2 10.10.2.2 10.10.2.3 10.1.1.1
LSP READ DB
Table 61 describes the significant fields shown in the display.
Ta b l e 61 show ip rsvp high-availability database lsp—Active RP Field Descriptions
Field Description
LSP WRITE DB Storage area for active RP LSP data. This field is blank on a
st
andby RP.
Tun ID Tunnel identifier.
LSP ID LSP identifier.
Dest Tunnel destination IP address.
Sender Tunnel sender IP address.
Ext. Tun ID Extended tunnel identifier; usually set to 0 or the sender’s IP
a
ddress.
Header Header information.
State Status of an entry. Values are as follows:
• Ack-Pending—Entries have been sent, but not
acknowledged.
• Checkpointed—Entries have been sent and
acknowledged by the standby RP.
• Send-Pending—Entries are waiting to be sent.