Specifications

show ip rsvp high-availability database
MP-534
Cisco IOS Multiprotocol Label Switching Command Reference
January 2010
The fields for a standby RP are the same as those described in Table 61 except they are now in the LSP
read database instead of the LSP write database that is used by an active RP.
LSP-Head Example on an Active RP
The following is sample output from the show ip rsvp high-availability database lsp-head command
on an active RP:
Router# show ip rsvp high-availability database lsp-head
LSP_HEAD WRITE DB
Tun ID: 10
Header:
State: Checkpointed Action: Add
Seq #: 3 Flags: 0x0
Data:
lsp_id: 8, bandwidth: 100, thead_flags: 0x1, popt: 1
feature_flags: path protection active
output_if_num: 5, output_nhop: 172.16.3.2
RRR path setup info
Destination: 10.0.0.9, Id: 10.0.0.9 Router Node (ospf) flag:0x0
IGP: ospf, IGP area: 0, Number of hops: 5, metric: 2
Hop 0: 172.16.3.1, Id: 172.16.3.1 Router Node (ospf), flag:0x0
Hop 1: 172.16.3.2, Id: 10.0.0.7 Router Node (ospf), flag:0x0
Hop 2: 172.16.6.1, Id: 10.0.0.7 Router Node (ospf), flag:0x0
Hop 3: 172.16.6.2, Id: 10.0.0.9 Router Node (ospf), flag:0x0
Hop 4: 10.0.0.9, Id: 10.0.0.9 Router Node (ospf), flag:0x0
LSP_HEAD READ DB
Action Action taken. Values are as follows:
• Add—Adding an item to the standby RP.
• Delete—Deleting an item from the standby RP. This
action appears temporarily while the active RP awaits an
ack of the delete operation.
• Modify—Modifying an item on the standby RP.
• Remove—Removing an item from the standby RP.
Seq # Numbers used by the active and standby RPs to synchronize
me
ssage acks and nacks to messages sent.
Flags Attribute used to identify or track data.
Data Information.
InLabel Incoming label identifier.
Out I/F Outgoing interface.
Next-Hop Next hop IP address.
OutLabel Outgoing label identifier.
Loose hop info Lists the loose hop expansions performed on the router, or
sp
ecifies None.
LSP READ DB
Storage area for standby RP LSP data. This field is blank on
an active RP.
Table 61 show ip rsvp high-availability database lsp—Active RP Field Descriptions (continued)
Field Description